Even dense concrete of high standard does not eliminate absorption of water through capillary and permeability. Concrete inherently absorbs moisture and soluble contaminates from its surrounding environment. For decades surface sealers and penetrating impregnations have been used to reduce the water absorption, and protect concrete from moss, algae and salt attacks. With the use of Nano Protect Concrete, this costly add on can be avoided.

By becoming a permanent part of the complete concrete or masonry,  rising damp and efflorescence can be prevented. Surface abrasion does not have an effect on the function ,even on high traffic areas.

The product does not rely on the use of polluting solvents to penetrate deep into concrete. The water based solution will be added to the concrete mix. The impregnating properties are working throughout the whole thickness of the concrete/masonry part.

Nano Protect Concrete can be used for bulk impregnation in manufacturing lines for pavers, bricks and concrete roof tiles without any modification of the machinery. Nano Protect Concrete can be also used in coastal areas, pool surroundings where high levels of salt can damage the concrete or create efflorescence.

The extreme reduction of the water absorption results in fast drying surfaces where moss and algae will not find the appropriate growing ground.

Nano Protect Concrete will reduce maintenance cost and time and water usage from cleaning while keep the appearance and the value of the asset at the highest possible level.